SLE Cladding Limited

For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax. 01948 66 55 32.

COLD ROLLED.

GALVANIZED Zed PURLINS

General layout view of a butt joint Zed purlin system

NOTE: We have reproduced the manufacturers entire brochure below. Unfortunately the brochure was produced mainly in the colour blue which does not scan and reproduce well. Thus some of the drawing are not of the quality that we would have liked.

	Zed Purlin Systems
	Typical Purlin Layouts
	Eaves Beams
	Anti - Sag Rod Fixing
	Diagonal Tie Wires
	Purlin Cleats and Cleader Angle
	Purlin Sleeved Systems
	Purlin Butt Systems
	Side Rail Sleeve Systems
	Side Rail Butt Systems

Available from SLE Cladding Ltd's stock
in popular standard sizes as per below.
14016 in 15ft & 16ft lengths
17716 in 20ft lengths
plus matching sleeves & cleats.
All others "To Order" in any size and length

Section Number	Depth	Thick ness	Top Flange	Bottom Flange	Top Lip	Bottom Lip	Wt/m	Area	IXX	ZXX	IYY	ZYY	F
	"D" mm	"T" mm	"A" mm	"B" mm	"C" mm	"D" mm	Kg	cm2	cm4	cm3	cm4	cm3	mm
12115	121	1.5	55	50	18	16	2.945	3.749	88.26	14.28	26.03	5.07	61.70
12116	121	1.6	55	50	18	16	3.182	4.052	95.13	15.40	27.94	5.36	61.70

14015	140	1.5	55	50	18	16	3.147	4.015	126.12	17.57	26.40	5.08	71.20
14016	140	1.6	55	50	18	16	3.374	4.340	136.32	18.99	28.41	5.36	71.20
14018	140	1.8	55	50	18	16	3.737	4.710	145.22	20.66	30.18	5.94	71.20
14020	140	2.0		50	18	16	4.141	5.211	160.06	22.71	33.06	6.54	71.20

17715	177	1.5	55	50	18	16	3.507	4.507	219.03	24.29	26.97	5.29	89.00
17716	177	1.6	55	50	18	16	3.787	4.680	223.11	25.98	28.81	5.61	89.00
17718	177	1.8	55	50	18	16	4.284	5.409	261.07	28.99	32.01	6.22	89.00
17720	177	2.0	55	50	18	16	4.756	6.073	288.26	32.01	35.13	6.83	89.00

20018	200	1.8	61	55	17	17	4.76	6.109	378.67	37.50	38.54	6.12	100.98
20020	200	2.0	61	55	17	17	5.30	6.790	418.28	41.42	43.36	6.88	100.98
20025	200	2.5	61	55	17	17	6.58	8.378	515.51	51.05	53.00	8.42	100.98

Zed Purlins are manufactured from prime pre-galvanised steel coil to BS EN 10326.2004 specification giving guaranteed minimum yield strength of 390 N/mm2 and are available manufactured to required length or from SLE Cladding Ltd's stock in sizes as at top of page.