For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32.

u-PVC EXTERIOR CLADDING

By Deceuninck.

Deceuninck cladding enhances the appearance of your home. Deceuninck exterior uPVC cladding is simple to fit.

PAGE DOWN TO VIEW PRODUCT RANGE



TO VIEW INSTALLATION GUIDE

COMMENT

Deceuninck's Decor uPVC profiles will not rot, crack, flake or warp and never require painting - just the occasional wash to remove environmental dust and grime.

Once fitted, Decor fascias, soffits, barge boards and exterior cladding enhances the appearance of any building and enables you to enjoy your leisure time without having to worry about repainting or repairs.

TO view products available from SLE Cladding Ltd: PAGE DOWN

Characteristics PVC-U

 Excellent weatherability.
Weather has no effect on PVC-U building materials. Problems like rotting, rust, etc. just don't apply. Even in special conditions like coast areas (salt, storm & sun) PVC-U is more applicable.

• Self extinguishing.
PVC-U burns when subjected to flame, but does not burn by itself: The product extinguishes immediately when the external flame source is removed.

• Resistance to most chemical products.
The list of chemical products that PVC-U is able to resist is very long indeed and can be obtained on request.

• Anti fungi properties.
No bacteriological development on PVC-U => hospitals, food industry, …

• Easy to clean = low maintenance.
Its closed, smooth surface means that PVC-U is extremely easy to clean using a gentle household detergent dissolved in water. This also means that the product is virtually dirt resistant because there are no pores which can be filled with dirt…

• Thermal insulator.
Like wood, PVC-U is a good insulator. Its coefficient of heat conductivity is actually slightly lower than wood at 0.17 W/mC°, compared with 0.23 W/mC°. The equivalent coefficient for aluminium is approximately 210 W/mC°.

• Acoustic insulator
The PVC-U window system and the performing seals are developed in this way that the sound source is shielded from the room.

 Easy to work with.
Practically any automated or manual processing is possible.

• Weldable.
Its ability to be welded means that this material offers window manufacturers the opportunity to install high productivity automated manufacturing systems with no need to cope with materials. A whole window can be welded together in just a few minutes. The fusion temperature of the weld is approximately 260°C. The sawn joints are heated locally to this temperature.

• Bondable.
Additional plastic components, such as end cap can easily be bonded to PVC-U.

• Good value for money.• Strength and light weight. • Cost effectiveness. • Recyclable

 

RANGE OF SLE CLADDING Ltd's STOCK ITEMS

Items listed below are available in single units ex SLE Cladding Ltd's stock in Deceuninck White only, other colours or finishes in the range below are to order in  PACK Quantities ONLY.

A  2 page pricelist of the products illustrated below is available on request by fax or post.
Manu. Code Drawing Description Length No. In Pack
HOLLOW PROFILES
P117 Tongue & Groove Shiplap Cladding 100m 6m 10
P126 Tongue & Groove Cladding 165mm 6m 5
P180 Tongue & Groove Cladding 100mm.  6m 10
CLADDING ACCESSORIES
P108 Joining Section.  6m 10
P109 Start & Edge Trim 6m 10
P115 External Corner Trim 6m 10
P197 Small Internal Corner 6m 10
FACIA ACCESSORIES
P113 Continuous Soffit Vent 5m 5
FOAM CLADDING
P1017 Shiplap Cladding 100mm x 9mm 5m 5
P1015  Shiplap Cladding 150mm x 9mm 5m 5
         
CLADDING ACCESSORIES
P1013 Centre Joint for 1015 - 1016 - 1017 5m 5
P1020 Edge Trim for 1015 - 1016 - 1017 5m 5
P1021 2 Part Set Top Edge Trim for 1015 - 1016 - 1017 5m 5
P1022 Start Trim for 1015 - 1016 - 1017 5m 5
P1125 2 Part Set. Corner Section for 1015 - 1016 - 1017 5m 5
P1030 Capping Board 400mm x 9mm 5m 1
P1031 Capping Board 300mm x 9mm 5m 2
P1032 Capping Board 230mm x 9mm 5m 2
P1026 Capping Board 200mm x 9mm 5m 2
P1034 Capping Board 175mm x 9mm 5m 2
P1035 Capping Board 150mm x 9mm 5m 2
P1039 End Cap for 1026 - 1027 - 1032 - 1034 - 1035 _ 25 pcs.
P1158 Centre Joints for 1026 - 1027 - 1028 _ 25 pcs.
P1159 Corner Joints for 1026 - 1027 - 1028 _ 25 pcs.
P1040 Flat Plank 150mm x 9mm 5m 5
P1041 Flat Plank 215mm x 9mm 5m 2
P1042 Flat Plank 300mm x 9mm 5m 5
P1090 30mm Stainless Steel PVC Headed Pins/Nails   500 pcs.
P1091 40mm Stainless Steel PVC Headed Pins/Nails   500 pcs.
P1096 30mm Stainless Steel Pins   250 pcs.

Deceuninck also manufacture a wide range of other products in many colours. These are available to order in  pack quantities only.

 
For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32.

Copyright (c)1999 SLE Cladding Limited.