|
|
|
INTRODUCTION TO COMPOSITE PANELS.
COMPOSITE PANELS. The days when an
insulated roof meant building it up with liner trays, micro
zeds, quilt insulation, vapour barrier and top sheet etc. etc
involving very high labour costs and the inherent risk of cold
bridging and weak spots are no more.
Whilst initially the cost of the panels may seem relatively
high, the speed and ease and thus savings to made on labour
costs as well as the increase in the quality of the roof is
enormous in both cases. Thus using the panels provides an higher
quality roof at a reduced cost when compared to the previous old
build-up method. |
|
|
|
Corus Trisomet 333 System
Overview |
| The new Trisomet 333 from Corus is an insulated roof and wall
panel system comprising a wider spaced trapezoidal steel external
skin, providing optimum performance for water drainage, strength and
walkability. Its auto-hesively bonded polyisocyanurate (PIR)
insulation core uses the latest foam technology providing enhanced
environmental benefits, together with fire performance approved by
LPCB. |
| |
| Corus Trisomet 333 System is a robust one component, factory
controlled, made to measure, insulated roof and wall panel system
that provides time saving in completion of cladding programmes;
eliminates the risk of interstitial condensation; and insures
uniform thermal performance throughout the building envelope.
Suitable for roof pitches down to 4 degrees. |
| |
|
The system offers excellent economic and
environmental performance, and comes with comprehensive
certification and Corus Platinum Warranty |
| |
|
 |
|
Trisomet Profile.
(Factory applied air seal on left side) |
| |
|
Key Benefits; Corus
Trisomet 333 System |
a) The one fix construction provides fast and
consistent installation, resulting in the contractor spending less time on site
|
b) The panel is fully filled with closed
cell foam eliminating the risk of interstitial condensation and
providing a consistent insulation performance over the
building envelope
|
c) Manufactured
in factory conditions operating to SO 9001 Standards
|
d) Panel
lengths up to 20m are available to optimise speed of installation
and minimise waste.
|
e) LPCB
(Loss Prevention Certification Board) approval to LPS 1181 part 1
helps reduce insurance premiums and assures reaction to fir
performance.
|
f) The
Corus Trisomet 333 System has been designed with
'anti-capillary-groove' to its external underlap.
This unique design feature enables the panels to
be installed without a separate site applied side lap sealant,
which saves material costs and installation time.
|
g) Lower
air permeability of the system reduces energy costs, carbon emission
rates and facilitates compliance with Building Regulations (Part L2
& TH6).
|
h) The
Corus Trisomet 333 System is a sustainable solution with responsible
sourcing and traceability of all component materials. The state of
the art PIR core has zero ozone depletion potential (ODP) and a
global warming potential (GWP) of less than 5.
|
i) Corus
Platinum System Warranty offers a 25 year free material performance
cover, including up to a 12 year workmanship guarantee.
|
| j)
Confidex Sustain available on Colorcoat assessed cladding systems
using Colorcoat Ultra or Colorcoat Prisma. |
| |
