For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32. HOT & COLD PIPE FLASHINGS     PIPE FLASHINGS.      BLACK for Cold.  RED for Hot. Flexible Base - easily formed to match sheet profile Adaptability - suites either std. or retrofit applications EPDM or Silicone Rubber - to suit cold or hot pipes Simple to fit - sleeve marker with pipe diameters Square Base - facilitates easy installation ORDER CODE Pipe Diameters (mm)     EPDM - Black Silicone - Red O - 25 degree roof pitch 0 - 45 degree roof pitch Base dimensions No. of RFC clips for retrofit applications PFD1E PFD1S 3 - 60 3 - 40   Min PFD2E PFD2S 10 - 90 10 - 70 155 x 155 5 PFD3E PFD3S 40 - 100 40 - 90 203 x 203 5 PFD4E PFD4S 75 - 150 75 - 135 254 x 254 6 PFD5E PFD5S 125 - 200 125 - 180 305 x 305 6 PFD6E PFD6S 145 - 250 145 - 230 356 x 356 7 PFD7E PFD7S 195 - 300 195 - 250 432 x 432 7 PFD8E PFD8S 275 - 380 275 - 355 540 x 540 9 PFD9E PFD9S 315 - 500 315 - 450 650 x 650 11 PFD10E PFD10S 330 - 660 330 - 550   Maxi Fixings, Drill Bits, Caps and Silicone to fix pipe flashings also available

 

IINSTALLATION Cut flashing to pipe diameter marked on side of flashing  (measurement shown on flashing can be 20% smaller than pipe diameter). Slide the flashing down the pipe, lubricate with water if necessary. Form the Aluminium base to fit the profile of the roof. Apply silicone sealant between flashing and roof. Press tightly into position with a large screwdriver or similar object. Fix with Tek Screws or other fixings and cover screws with push on caps.