SLE Cladding Limited

Designed in Onduline's Italian design studio with a unique three tone colour finish recreating warm natural colours normally only associated with expensive and heavy clay roofing products. This attractive colour finish combined with Mediterranean bold rolled profile results in an exciting and exclusive roof covering that bestows an attractive aesthetic roof finish to any structure

The practical design aspects of the Onduvilla tile strip range have not been overlooked with a innovative tile lapping system utilising a grooved lap joint to provide enhanced weathering performance.

The tiles form a desirable, durable and lightweight roof covering that can either be laid on a roof decking or close boarding. The system is ideal for a wide variety of applications and suitable for both trade and DIY projects.

Onduvilla Tile Strip

Length: 1.060m. Width: 400mm Thickness: 3mm Weight per Tile: 1.27 kg

MATERIAL SPECIFICATIONS.
Colour: Onduvilla Tiles are available in three attractive 3 Tone colours: Red, Green, and Brown. The tiles feature a pigmented base colour with secondary painted surface finish

Corrugations: 6 corrugations with 5 flats
Corrugation Depth: 40mm. Width: 90mm
Minimum Roof Pitch: 10 degrees (decked roof)
Coverage Per TILE: 0.31 m2 = 3.23 Tiles per m2
Ventilation: 85cm2/m

Tiles Per Pack: 7
Weight Per Pack: 9kg
Packs Per Pallet: 57
Coverage Per Pack: 2.17m2
Coverage Per Pallet: 123.7 m2

FIXING GUIDE
To ensure a long lasting roof it is essential to fix the tiles in accordance with the fixing instructions. Onduvilla Tile Strips can be laid directly onto OSB or plywood decking or close laid boarding providing the roof deck will accept a nail penetration of 20mm, existing roofing felt can be overlaid.

If decking is thinner than 20mm or if a batten fixing is required, first fix 25 x 100mm treated tile battens at 160mm centres to provide a fixing and support structure for the Onduvilla tile strips in accordance with the fixing guide.

Insulation can be incorporated into the roof structure using rigid insulation board laid in accordance with the manufacturers instructions. However as Onduvilla is not vapour permeable a ventilation channel is required below the tiles. Details are available from Onduline's technical department. Tel. 020 7727 0533. Fax. 020 7792 1390

IMPORTANT: Check that the roof structure is sound and repair and reinforce roof as required


Tile Layout: Commence fixing the tiles at the opposite end of the roof to the prevailing wind. Start alternate courses of tiles with half tile to create a broken pattern to the tile side laps.	Minimum Roof Pitch: Pre-formed lap grooves provide assured weathering on roof pitches as low as 10 degrees on decked roofs and 15 degrees laid on close boarding.	Eaves: Nail the optional batten cloak to the decking at the eaves, lay tiles with a 25mm to 50mm overhang. Verge: Support the last tile corrugation with a timber edging positioned to align under corrugation

Ridge: Always start fixing ridges the opposite end of the roof from the prevailing wind. Lay Onduvilla 3 tone Ridges with 200mm overlap. fix by nailing in every corrugation.	Sheet end laps: Mark out decking with tile laps, then simply align the pre-formed capillary grooves of the tile end laps with a single corrugation side lap and nail into position through top of corrugations	Cutting: To cut the width of the tiles score with a knife, then bend the tile up to separate sections. To cut down the length of the tiles it is advisable to use either an electric rotary saw or an angle grinder.

ACCESSORIES
Onduvilla Ridges Width 50cm. Length: 90cm. Thickness: 3mm. Weight per ridge: 1.4kg Colour: 3 tone Green, 3 tone Red, 3 tone Brown Onduvilla Nails. Carbon Steel, zinc plated and passivated. Safe top bonded washer in UV stabilised P.V.C. Available in Green, Red, and Brown. Length: 65mm (overall) Diameter: 3.55mm Packing: Packs of 100. 30 Packs per Box Ventilated Eaves Fillers Black polypropylene with a special additive for extra UPVC resistance Length: 1m Weight: 5.25kg per box Dimensions: 1010mm x 160mm x 130mm per box Packing 50 strips per box
GENERAL INFORMATION
Maintenance. To ensure a long life the roof should be cleared of leaves and debris and gutters cleaned regularly
Installation. The Onduvilla tile system must be laid in accordance with fixing instructions.
Technical Note. Onduvilla tiles are not classified to External A.AA fire rating as required in UK Building Regulations for some classes of structure. In these cases they must be fixed on a fully supporting roof deck and the sheet coated with a proprietary AA surface paint treatment applied in accordance with the paint manufacturers instructions.
Conditions of use. Although the colouring process in the manufacture of the Onduvilla tile is long lasting, as with similar natural roofing materials it is t to the effects of weathering. The colour can also differ between production batches. The Onduline Group will not be responsible for the effects of structural movement related problems

For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax. 01948 66 55 32


3 Tone Green	3 Tone Red	3 Tone Brown
SLE Cladding Note. The poor quality of the scanned images in this page do not do the product justice.