PVC ONDULINE PROFILED LIGHT SHEETS

 Available in two forms - "glass clear" transparent to provide optimum clarity and light transmission, and translucent (FREELIGHT) for use where diffused lighting is required. Manufactured to the same size and profile as onduline corrugated sheets, they provide a simple, economic way of gaining light through the roof.

Manufactured from high quality P.V.C. resins incorporating U.V. inhibitors and components to provide unequalled weathering qualities and resistance to impact. Length: 2m Width: 950mm Weight: 3.5 - 4kg dependent on thickness.

To see our page on Rooflights: Freelite & Clear CLICK HERE

Manufactured from the same material and to the same high specification as Onduline sheets. Flexible double wings accommodate  a wide range of roof angles. Available in the four Onduline colours - black, red, green & brown.

RIDGE. Length: 900mm (775mm cover length). Width: (Flat) 500mm. Weight: 1.2kg.

VERGE. (Barge) Length: 1100mm (975mm cover length). Width: (Flat) 410mm. Weight: 1.2kg

If you would prefer Plastic Coated Steel Ridge or Barge in 3 metre lengths CLICK HERE to visit our Flashings page.

APRON FLASHING

Apron flashings are designed to seal the gap between Onduline sheets and vertical wall abutments. Suitable for any pitch of roof.

Material Specification:

1.4mm gauge black polypropylene

Length:

930mm nominal length (835mm cover width)

CORRUGATED FOAM FILLERS.

Designed to match the Onduline profile, these polyethylene units seal the corrugations at eaves and ridge, preventing the ingress of water, dust and draughts.

Material specification: 35 grade fully close cell, cross linked polyethylene foam in black and white.

Length: 846mm (cover width of sheet) Onduline Profile.

To visit our page on Foam Ridge & Eaves Fillers CLICK HERE

ROOFLIGHT WINDOWS.

The Onduline skylight/roof window provides light and air to the roof and also serves as an exit to roof areas. Modern design prevents infiltration of snow and rain. Quick and easy to install.

Material Specification: Corrugated base. Black P.E. (Polyethylene). Inner liner: Water resistant plywood box. Opening Light: Clear Acrylic (UV - resistant)

Base Length: 890mm. Base Width: 660mm. Height: 150mm Thickness: 3mm. Light Area: 360mm x 420mm. Weight 2.5kg.

ROOF VENTILATORS

A range of easy-to-fix roof ventilators designed specifically for use with Onduline sheets to provide an aesthetically pleasing appearance. They have low air resistance while preventing access by driving rain and snow.

            Material Specification            Insert Grill 4mm gap.

PE NAILS

Specially designed UV resistant P.E. headed nails with zinc plated corrosion resistant shanks. Available in Black, Red, Green & Brown.

Material Specification

Length: 73.5mm (Overall). Diameter 3mm.

Packing: packs of 400.

NOTE. These are the nails we stock as everyone seems to specify them  in black only. Other colours and types would need to be specially ordered in from the manufacturer.

SAFE TOP NAILS

The safe top bonded washer is resistant to UV radiation and with its weatherproof seal provides a superior resistance to wind uplift. They are particularly suitable for use on hardwood purlins. Available in Black, Red, Green & Brown.

Material Specification: Carbon steel, zinc plated and passivated. Safetop Bonded washer in UV stabilised. Length 75mm (Overall). Diameter 3.55mm. Packing: Packs of 100.

STELFIX SCREWS

For fixing to steel purlins using a power drill. The self-tapping screw has a PVC washer and a split sleeve to prevent the sheet riding up on the thread. It enables correct tension to be achieved avoiding overtightening and distortion.

Material Specification.

Yellow passivated screw with anti corrosion coating. Cap colour coated to sheet. Washer in UV stabilised PVC. Sleeve in zinc coated steel. Length 65mm. Diameter: 5.5mm. Packing: Packs of 100.

MULTI-PURPOSE EAVES TRAY

Manufactured in a flat sheet with pre-formed fold lines to provide either a 75mm or 100mm drip edge. It is used below Onduline sheets on existing decked roofs to avoid re-positioning gutters and allowing sheet overhang at the eaves to be reduced. On Oversheet projects it avoids cutting existing sheets at the eaves, a particular benefit when oversheeting asbestos-cement roofs. Also used to form an eaves weathering tray for the Ondutile System.

Material Specification:

Material: 1mm gauge black PVC. Length: 1.275m (allow 150mm overlap). Width: 300mm. Weight: 0.fkg per tray. Box weight: 13.8kg.

BATTEN CLOAKING PIECE

Designed for the Ondutile system and used with the Eaves Ventilator Strip, it protects the eaves batten from possible water ingress whilst also providing an aesthetically pleasing finish to the eaves detail.

Material Specification.

1.4mm thick "L" shape section, Black Polypropylene. Length: 1.22m (1.12m cover width) Width: 55mm x 55mm for 25mm battens. Weight: 0.1kg/ piece. Packing: Available in singles.

The Ventilator Strips are used to allow ventilation into the roof space whilst preventing the infiltration of birds into the eaves. They are secured by nailing with galvanised round headed nails through the slots on the base-tab into the eaves purlin.

Material Specification.

Black Polypropylene with a special additive for extra UV resistance.

Length: 1m.

Purpose designed, injection moulded adaptor with extension sleeve which allows the roof ventilator to be connected to a pipe system, it can be used for soil pipe or mechanical fan extraction.

Material Specification.

 ABS copolymer Pipe Outlet Diameters: 110, 125 or 150mm.

Designed for use with the Onduline Pipe Adaptor this flexible pipe has sealed cuff ends and helical wire reinforcement. Supplied complete with 2 clamps.

Material Specification.

 Black PVC. Length: 600mm. Diameter: (internal) 110mm.