|
For further information please contact SLE Cladding Ltd. Tel.
01948 666 321. Fax. 01948 66 55 32
|
| ELITE PVC |
| Hygienic Interior Wall Cladding Panels |
|
|
|
For further information please contact SLE Cladding Ltd. Tel.
01948 666 321. Fax. 01948 66 55 32
|
| ELITE PVC |
| Hygienic Interior Wall Cladding Panels |
|
|
|
Note. To see Elite CE Rigid PVC, a much thicker rigid sheet please page down. |
| Product |
| Elite PVC is a semi rigid, opaque flat building material made of food-safe polyvinyl chloride. |
| Purpose |
| Elite PVC panels are designed for use on interior walls where a hygienic, easy to clean surface is required |
| Certifications |
| 1/. The panel has a Class "1" flame spread (per BS476 Part 7) and Class "O" fire propagation* (per BS479 Part 6). |
| 2/. Elite PVC is certified to pass Food Taint Tests |
| Operational Temperature Range |
| Panels will perform in temperatures from 0 deg. to 50 deg. C |
| * when attached to a non-combustible substrate |
|
Design Data |
|||
| Nominal Thickness | Colour options | Size | Finish |
| 2.5mm, 3.0mm |
White Blue ** Green** Grey** Ivory** |
1220mm wide x 2440mm, & 3050mm Long | Satin or Gloss |
** only available on 2.5mm satin sheets
|
Physical Properties |
|||
|
Property (Method) |
Condition |
Unit |
Value |
|
Izod Impact Strength |
|
J/mm |
122 J/mm |
|
Gardner Impact Strength |
|
in-lbs |
|
|
Density (D-1505) |
|
g/cm3 |
1.4 |
|
Heat Deflection Temperature (D-648) |
Load: 1.82 MP |
deg. C |
65 - 68 |
|
Service Temperature Range |
|
deg. C |
-20 to +68 |
|
Thermal Conductivity (C-177) |
|
W/m K |
0.15 |
|
Coefficient of Linear Thermal Expansion (D-696) |
|
cm/cm deg. C |
6.7 x 10-5 |
|
Impact Falling Weight (ISO 6603/1) |
3 mm sheet |
J |
95 |
|
Rockwell Hardness (D-785) |
|
R Scale |
97R |
|
Tensile Strength at Yield (D-638) |
10mm/min |
MPa |
52 |
|
Tensile Strength at Break (D-638) |
10mm/min |
MPa |
50 |
|
Elongation at Yield (D-638) |
10mm/min |
% |
3 |
|
Elongation at Break (D-638) |
10mm/min |
% |
140 |
|
Tensile Modulus of Elasticity (D-638) |
1 mm/min |
MPa |
2,900 |
|
Flexural Strength (D-790) |
1.3 mm/min |
MPa |
80 |
|
Flexural Modulus (D-790) |
1.3 mm/min |
MPa |
2,700 |
|
Elite CE Rigid Sheets |
|
|
| Elite CE
sheets are co-extruded to combine a homogeneous foam core with
an integral skin of rigid food-safe PVC. Elite CE PVC provides a
fast-fix wall covering solution for hygienic installations where
existing walls are damaged, unsightly and/or uneven Elite CE sheets are around half the weight of solid PVC, yet are rigid enough to be installed with an absolute minimum of adhesive or substrate preparation. Offering all the benefits of standard Elite PVC. CE sheets greatly reduce installation time and allow poor quality surfaces to be covered with minimal effort. Elite CE PVC sheets are specifically designed to offer a hygienic, easy-to-clean wall finish for areas where standard Elite PVC can't provide adequate rigidity |
 |
 |
 |
 |
|
For further information please contact SLE Cladding Ltd. Tel.
01948 666 321. Fax. 01948 66 55 32 |
Copyright (c)1999 SLE Cladding Limited.
