|
For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax. 01948 66 55 32 |
|
FRP GLASBORD |
|
Food Safe Hygienic Wall Cladding Boards |
|
|
|
Glasbord showing water repellent properties |
|
|
|
Fibreglass panel with Surfaseal |
| Product. |
| FX Glasbord with Surfaseal is a durable semi-rigid building material made from fibreglass reinforced plastic (frp) |
| Surfaseal Finish |
| Surfaseal is a unique patented surface treatment that, when compared to ordinary frp, exhibits up to ten times the cleanability , six times the stain resistance, and twice the abrasion resistance. |
| Purpose |
| FX Glasbord panels are designed for interior wall finishes where durable, hygienic, easy to clean surface is required. |
| Certification and Identification |
| 1/. The panel has a Class "1" flame spread (per BS476 Part 7) and Class O fire propagation (per BS476 Part 6 |
| 2/. Fibreglass Reinforced Plastic does not support mould or mildew (per ASTM D3273 and ASTM D3274) |
| 3/. FX Glasbord is designated by 2 red and 1 blue thread on the back of the panels and two fluorescent threads on the front of the panels (visible only under UV light) |
| Operational Temperatures Range |
| Panels will perform in temperatures from -40 deg. C (-40 deg F) to 54 deg. C (130 deg. F) |
| Design Data | |||
| Nominal Thickness | Colour Options | Size | Finish |
| 2.3mm |
White Cream Beige Grey Ivory Silver |
1220mm x 2440mm, 3050mm | Embossed |
| Note. White is the popular colour. For availability of other colours please ask SLE staff to investigate. | |||
| Physical Properties | ||
| Property | Typical Values | Test Method |
| Flexural Strength | 13.6 x103 psi (94 Mpa) | ASTM D790 |
| Flexural Modulus | 0.608 x 106 psi (4192 Mpa) | ASTM D790 |
| Tensile Strength | 7.1 x 103 psi (49Mpa) | ASTM D638 |
| Tensile Modulus | 0.803 x 106 psi (5537 MPA) | ASTM D638 |
| Barcol Hardness | 45 | ASTM D2583 |
| Izod Impact Strength | 14ft-lbs (5.1 J/mm) | ASTM D256 |
| Gardner Impact Strength | 45 in-lbs (5.1 J/mm) | ASTM d3029 |
| Coefficient of Linear Thermal Expansion | 1.7 x 10-5 in/ini deg F (31um/mi deg C) | ASTMD696 |
| R Value | 0.32deg/24 hrs @ 25deg.C (77degF) | ASTM D570 |
| Surface Burning Characteristics | 0.23 hrift2i deg F/Btu (0.047 hrift2i deg C/kcal) | ASTMC1114 |
| Taber Abrasion Resistance | Class "1" | BS476 Part 7 |
| 0.020 deg max wt loss | Taber Test | |
 |
 |
 |
 |
|||
For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax. 01948 66 55 32
Copyright (c)1999 SLE Cladding Limited.
