SLE Cladding Limited

Roof Drainage Requirements. The area of the roof determines the number and position of outlets required. to drain the collected rainwater. By using the flow chart below calculated on a 1.25 mm/sec. rainfall maximum the required amount can be calculated

GUTTERS

BR51 114mm Square Gutter 2 metres.

BR52 114mm Square Gutter. 4 metres.

BRACKETS

BR53. Multi Fix Facia Bracket.

BR54. Joint/Union Bracket.

OUTLETS & STOPENDS

BR55. Running Outlet.

BR556 Stopend Outlet.

BR56. Internal Stopend.

BR57. External Stopend.

GUTTER ANGLES

BR58. 90Deg. Gutter Angle.

BR58/120. 120Deg. Gutter Angle.

BR59. 135Deg. Gutter Angle.

BR5. Fabricated Gutter Angle.

BR50. Gutter Clip.

GUTTER ADAPTORS

BR591. Square Style to Half Round Gutter Adaptor.

BR592. To Ogee Adaptor RH.

BR593. To Ogee adaptor LH.

RISE & FALL RAFTER BRACKETS

BRF5. Rise & Fall Bracket. (Galv)

BRT5. Rafter Top Gutter Bracket. (Galv)

BRS5. Rafter Side Gutter Bracket. (Galv)

65mm SQUARE DOWNPIPES & FITTINGS

DOWNPIPES, PLAIN ENDED.

BR500. 2 Metre Downpipe

BR501. 2.5Metre Downpipe.

BR503. Metre Downpipe.

BR504. 5.5 Metre Downpipe.

CONNECTOR & ADAPTOR.

BR506. Downpipe Connector.

BR517. Square to Round Adaptor.

BENDS & SHOE

BR508. 92.5 deg. Downpipe Bend.

BR509. 112.5 deg. Downpipe Bend.

BR516. 112.5 Deg. Downpipe Shoe.

BRANCH, HEAD, BRACKET & ACCESS PIPE

BR518. Downpipe Branch.

BR511. Downpipe Rainwater Head.

BR507. Downpipe Bracket.

BR510. Access Pipe.

B4901. Universal Adaptor (Socket) (Rubber).

114 Square Style.	Roof Drainage Capacity
Gutter Width 114mm	1:600 Gutter Fall	Outlet at Centre	Outlet at End
Downpipes 65 mm Square	Flow Capacity	182 Litres per min.	91 Litres per min.
Downpipes 65 mm Square	Max. Roof area	144 Sq. Metres	72 Sq. Metres
NOTE. A gutter fall of 1:600 = 25mm in 15 Metres (1 inch in approx 50ft.)