FIBRE-CEMENT RAINWATER GUTTER & FITTINGS.

 Fibre-cement Gutter & Fittings are available in natural grey. Colours ( painted & baked) are manufactured to order. The "Colour Chart" is on the first Fibre-cement page. CLICK HERE

The manufacturer has divided the rainwater good into Standard Range and Non Standard Range. Items in the standard Range are lower in cost than a similar product in the non standard range.

 

STANDARD RANGE of RAINWATER GOODS

Downpipes. Available in dia. of 75 & 100mm x 1800mm long and dia. of 100 & 150mm x 2400mm long Swan Neck Bends. available in 100mm dia in projections of 150, 225, & 300mm Half Round Gutter. Length 1800 mm. Available in 125, 150 & 200mm girths
Half round Stopends for socket & spigot. Girths 125, 150 & 200mm Half Round Drop ends  with Socket.

 125 & 150mm dia. with 75mm outlets. 150 & 200mm dia. with 100mm outlets. 200mm dia. with 150mm dia. outlet.

 Half Round Nozzle  outlets with continuous socket.

 150mm dia. with 75mm  & 100mm outlets.  200mm dia. with 100 & 150mm dia. outlets.

BELOW THE NON STANDARD RANGE of RAINWATER ITEMS

 

   DOWN PIPES & FITTINGS.

Downpipes. Available in lengths of 1800mm x 65mm dia. & lengths of 2400mm x 75mm & 150mm dia. Swan Neck Bends. available in dia. of 65mm, 75mm, & 150. with projections of 150mm, 225mm, 300mm, & 450m.  Branches. Available in 65mm dia. x 120 & 135 deg. and in 90, 110, 120, & 135 deg. x 75mm, 100mm, & 150mm diameters. Loose Sockets. Available in 100 & 115mm
Loose Sockets. Available in 65mm, 75mm, 100mm & 150mm diameter. Shoes.  Available in 65mm, 75mm, 100mm & 150mm diameter. Pipe Clips.  Galvanised Steel. Available from 100 & 150mm diameter. Rain Water Heads. Available with outlets of 65mm, 75mm, 100mm & 150mm.

 

   HALF ROUND GUTTER.

Half Round Gutter. Length 1800 mm. Available in 100, 115 mm girths Gutter Nozzles with continuous socket. 100 & 115 mm x 65mm outlets. 125mm x 75 & 100mm outlets. Drop end with socket. 100 & 115mm x 65mm outlets & 125mm x 100mm outlet.. Angles. Girths 100, 115, 125, 150 & 200 mm. Stopends for socket & spigot. Girths 100, 115mm. Galvanised Facia Bracket. Girths 125,150 & 200mm

 

   BOUNDARY WALL GUTTER.

Boundary Wall Gutter. Length 1800mm. Nozzle Angle Drop end Stopend
Boundary Wall Gutter is manufactured in 4 sizes. The 279 x 127 x 178mm is the popular size and stocked by SLE cladding Ltd. The other 3 sizes are to order.

Column A represents the measurement across the top. B the depth inside and C across the bottom inside. All in mm.

 A B C
279 127 178
305 152 127
305 152 229
457 152 305

 

   VALLEY GUTTER

Valley Gutter Profile Nozzle Drop end Stop end
Valley Gutter is manufactured in 4 sizes. The 406 x 127 x 254mm is the popular size and stocked by SLE cladding Ltd. The other 2 sizes are to order.

Column A represents the measurement across the top. B the depth inside and C across the bottom inside. All in mm.

 A B C
406 127 254
457 127 152
610 152 229

 

   BOX GUTTER
Box Gutter Nozzle Drop end Stopend
Box Gutter is manufactured in 3 sizes. All 3 sizes are TO ORDER.

Column A represents the measurement across the top. B the depth inside.   All in mm.

 A B Outlet Size
127 114 75 & 100
127 152 75 & 100
305 203 100 & 150

 

GUTTER PADS
No. To Fit. Size
1 5" Half Round Gutter 240 x 70 x 9.5mm
2 6" Half Round Gutter 290 x 70 x 9.5mm
3 8" Half Round Gutter. 360 x 70 x 9.5mm
4 480 x 70 x 9.5mm
5 610 x 70 x 9.5mm
6 700 x 70 x 9.5mm
7 740 x 70 x 9.5mm
8 810 x 70 x 9.5mm

IMPORTANT. With Boundary Wall, Valley & Box Gutters tighten bolts in the bottom of the valley first.

 

GUTTER PADS

Photo = shows part of a soft black foam gutter pad. The white strips are the protective strip away cover over the adhesive. The opposite side has no adhesive.

The pads are manufactured to length required for gutter size, see chart above  or in rolls usually 10 metres long.

Galvanised Round Flat Washers.25mm diameter x M8

 

Galvanised Roofing Bolts. Round cross headed. Threaded entire length.  Use M8 x 50mm

Hole Seal Washers for positions 6 & 7 below. The small washer is the plastic Ring Washer. no. 4

 

 

How to assemble gutters

   1.   Gutter Joint Pad
   2.   Bolt
   3.   Slotted Bolt Head
   4    Plastic Ring Washer
   5.   Metal washer
   6.   Hole Seal Washer
   7.   Hole Seal Washer
   8.   Metal Washer
   9.   Nut
 
     
 

Copyright (c)1999 SLE Cladding Limited.