For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

FIBRE-CEMENT SHEETS & FITTINGS

PROFILE R6. (Formerly known as B6 & Big Six)

The R refers to a reinforcing web inserted the length of the sheet at the bottom of each corrugation.

FOR MITRING and LAYOUT DETAILS   CLICK HERE

Profile 6 sheets (B6) as below are now available in Plastisol, (Plastic coated steel)
  They can be manufactured to any length for over cladding existing asbestos-cement roofs. CLICK HERE to visit page. Also available in Trafford Tile profile.
 

 

 

P6 Lining Panel

Page Down For Colour Chart, Sheet Sizes & Curved Sheet Details.

Standard Fittings & Accessories
 
P6. Sheet. Overall width 1086mm. Cover width. 1016mm. Nominal pitch of corrugation 146mm. Overall depth profile 54mm. Nominal thickness 6.7 mm. Page down for sheet sizes and availability.

Cranked Crown Ridge Sheet. Girth 750 & 900mm. Roof Pitches 5, 10,12.5, 15, 17.5, 20 & 22.5 degrees.

 Cranked Crown Ridge Vent Sheet. 750 & 900mm girth. Pitches 5, 10, 12.5, 15, 17.5  20, & 22.5 deg.

 

 Open Protected Ridge Flashing. Used in Pairs. Cover length 2200mm. Coverwidth 300mm.  Soffit for protected ridge cover length 2400mm coverwidth 300mm. Thickness 9mm.
Two Piece Close Fitting Ridge. Coverwidth 1016mm. Overall Width 1124mm Two Piece Ventilating Ridge. Coverwidth 1016mm. Overall Width 1124mm Two Piece Plain Wing Ridge. As the plain wings do not close the corrugations, this ridge allows a measure of ventilation. Two Piece North Light Ridge

 
Eaves Filler Piece. (Universal Handing). To close corrugations at eaves and provide a flat soffit for sealing at walls. Side Closure Piece No. 1For P6. Lengths 1375mm. & 1975mm. Eaves Corrugation Closure. Coverwidth 1016mm. Overall Width 1055mm. Backs in 65mm, 100mm, 150mm & 250mm. Apron Flashing Piece. L.H. Only. Coverwidth 1016mm. Overall Width 1086mm Under Glaze Flashing Piece.  Fitted over roof sheets below a run of glazing and some details at head of vertical sheeting.  Available left or right hand. Left hand fitting illustrated. Coverwidth 1016mm. Overall Width 1062mm.
Disc Type Ridge Finial   Hooded Two Piece Ridge Finial. Made to suit roll top barge boards with two piece adjustable ridge only Movement Joint. Width 311mm. Lengths 1800, 2400 7 3000mm.  Movement Joint Crown Cap. Girth 1300. Width 330. Roof Pitches 7.5, 10, 12.5, 15, 17.5 & 22.5 degrees. Note 5, 7.5 & 20 are non standard.
Movement Joint Stop End. 310mm wide x 150mm long x 165mm deep. Roll Top Barge Board. Overall Lengths. 1800, 2400 & 3000mm Cover Lengths 1650, 2290 & 2850mm. Wing Dimensions 200 x 200mm & 300 x 300mm  Crown Cranked Roll Top Barge Board. Girths 1300 & 2200mm. Wing dimensions 200 x 200 & 300 x 300mm. Roof Pitches 7.5, 10, 12.5, 15, 17.5 & 22.5 degrees. Note 5, 7.5 & 20 are non standard. Vergeline Barge Board. Handed. (L.H. Illustrated). Cover Lengths 1800, 2400, & 3000mm. Wing Dimensions 310 & 300.
Cranked Crown Vergeline Barge Board . Girth 1300mm. Wing Dimensions 310 x 300mm.  Roof Pitches 7.5, 10, 12.5, 15, 17.5 & 22.5 degrees. Note 5, 7.5 & 20 are non standard. External Corner Piece. Wings 200 x 200mm and 300 x 300mm. Lengths 1800, 2400 & 3000mm.

 

 Cranked External Corner Piece.
Wing dimensions 200 x 200mm & 300 x 300mm. Girths 1300mm & 2200mm.
Roof Pitches 7.5, 10, 12.5, 15, 17.5 & 22.5 degrees. Note 5, 7.5 & 20 are non standard.		 Horizontal Flashing Piece. Used at the base of vertical sheeting above a wall or at any designed interruption of vertical sheeting. Cover Width 2032mm. Overall Width 2080mm. Base 75mm for single skin cladding and 140mm for double skin cladding.
 
Below this line products are classed as non standard by the manufacturer. Delivery period may be extended
Eaves Bend Sheet.
Length 1525mm. Std Radius 300mm. Roof Pitches 5 to 22.5 degrees x 2.5 degree increments

 

 

 P6 Curved Sheet. For Nissan & Romney Huts & Belfast Hangers, Made to Order. Page down for details.
Maximum girth 3050mm Minimum girth 1375mm

 

 Cranked Crown Ridge Sheet. Girth  1800.mm Roof Pitches 10,12.5,15,17.5,20 & 22.5 degrees.
CLICK HERE for SAFETY WARNING & DISCLAIMER.		 Cranked Crown Ridge Vent Sheet. 1800mm girth. Pitches 10, 12.5, 15, 17.5, 20 & 22.5 degrees.
CLICK HERE for SAFETY WARNING & DISCLAIMER.

 
Two Piece Hip Ridge.
Coverwidth 1000mm. Overall width 1100mm

 

 Side Closure Piece No. 1. Length 1375 & 1975mm. Dimensions 210 x 70mm. or 210 x 140mm  

 

 Jamb Filler Piece No, 2, Length  for single skin cladding 3000 x 210 x 70mm.
Lengths for double skin cladding 3000 x 210 x 140mm		 Continuous Ridge Ventilator.
Roof Pitches 5 to 17.5 degrees x 2.5 degree increments.

Flat Base 20 degree pitch and over only.
Eaves Corrugation Closure Piece . 65,100,150 &250mm back.
Note the 250 back closer is of a slightly different design to the above illustration.

Roll Top Barge Board. Overall Lengths. 1800, 2400 & 3000mm Cover Lengths 1650, 2290 & 2850mm. Wing Dimensions 200 x 200mm & 300 x 300mm. (This barge appears in both Std. & Non Std. in same sizes. It must be a manufacturers publishing error, SLE thinks it should be std).

 Cranked External Corner Piece. Wings 200 x 200mm & 300 x 300mm. Girth 1300 & 2200mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments.
Note 5, 7.5 & 20 deg. are non standard.		 Cranked Crown Roll Top Barge Board. Girths 1300 & 2200mm Wing Dimensions 200 x 200mm & 300 x 300mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments.

 
Cranked Eaves Roll Top Barge. Radius 354mm. Girth 1575mm Wing Dimensions 200 x 200mm.  Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments.
Handed. Left Hand Illustrated.		  

Vergeline Bargeboard Stop End. Handed. 

 

 

 Internal Corner Piece. Wings 200 x 200mm. Lengths 1800, 2400 & 3000mm.   Apex Filler. Used to close lining under close fitting ridge in double skin construction. Coverwidth 1825mm.

 
Valley Piece. Effective Length 2950mm. Overall Length 3050mm. Standard Angle 10 deg. For roof pitches of 15 deg. and above only.

 

 

 Movement Joint Two Piece Ridge Cap.

Width 330mm.

 Lining Panels. Made to Order. Lining panels are specially designed for use with Profile 6R sheets, to provide a built up insulation system that remains vapour permeable and offers excellent resistance to corrosive internal atmospheres. Lengths = 1450, 2350, 2525, 2825, & 3050mm. Cranked Crown Lining Panel. Coverwidth 1016mm. Overall Width 1054mm. Girths 900 & 1800mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments. (Made to Order)

 
Eaves Bend Lining Panel. Girth 1450mm. Standard Radius 300mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments. (Made to Order) Underlining Movement Joint. Flat Strip width. 75mm. Overall Lengths 1800, 2400 & 3000mm. Underlining Joint Crown Cap. Girth 900mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments.

Underlining Distance Piece. Type DC Width 100mm

 

Details

Curved P6R Sheets

CURVED P6R SHEETS

Made subject to acceptance of special order by Eternit. Maximum Girth 3050mm. Minimum Radius 1375mm

Sheets are delivered on a charged for non returnable cradle. Charge at 1/10/2003 = £76.30.

Cradles will hold up to 15no. x 2743mm. 25 no. x 5423mm & 30 no. x 5940mm

 

 

 

Measurements Required.

A-B & C-D.

Also A-C-B not essential but is helpful. (All dimensions to be taken to the underside of a trough corrugation).

 

 

FIBRE-CEMENT COLOUR CHART.   (Standard Colour Range)

Always ask for an actual colour sample before ordering. An extended colour range chart is available on request
Blue.  

BS18-B-29

 Laurel Green.

   BS 12-B-29

 Brown.

BS 08-B-29

 Gunmetal Grey.

 BS 18-B-25

 Green.

BS 14-C-39

    Russet

  BS 04-C-39
 
     

For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

Copyright (c)1999 SLE Cladding Limited.