For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

FARMSCAPE

 
Profile 6R fibre-cement sheets and fittings in 3 special colours.
 

 

 

What the manufacturers say.

The Farmscape product range uses the Profile 6 profile and is designed to reduce the visual impact of buildings on the landscape by giving them a more natural look from new. This effect is achieved by applying a surface pigmentation to the top face of the sheet. Unlike a dense layer of gloss paint, this pigmentation allows the distinctive texture of the fibre cement substrate to show through, and gives the product a far more natural appearance than the finish traditionally available to planners and designers.

The Farmscape range consists of three carefully chosen matt colours, namely: Anthracite (grey), Serpentine (green) and Bracken (brown). Together with the subtle variations in tone inherent in any natural cementatious product, the appearance of these colours will blend with almost any landscape from the day the building is erected.

The range of products available with the Farmscape finish has been carefully selected to provide the optimum flexibility for both building design and construction. The Farmscape product range comprises three convenient sheet lengths (1525mm, 2440mm and 2900mm) from the highly successful Profile 6 portfolio, both of which are classified as non-fragile.

When Farmscape sheets are correctly installed, together with a selection from the variety of accessories available, the whole roof can be designed and installed as non-fragile.

 Economically priced product for buildings that have to blend into the landscape
Factory-applied matt finish in a choice of 3 organic colours
Vapour-permeability stops condensation
Non-fragile material suitable for HSG 33 applications
Easy to install and fix
Maintenance-free product with 30 year durability guarantee
 

Important notes from SLE Cladding Ltd
The farmscape range has been produced primarily as a lower cost colour range for the agricultural industry. In the main agricultural buildings both large and small are manufactured to the same simple standard format using a small standard range of sheets and fittings.

To meet these requirements Farmscape is only produced in this small standard range of products as listed below. If tempted to sheet a building other than a modern standard farm building using Farmscape, do check that suitably sized Farmscape materials are available to complete the application.

Note also, like all coloured fibre-cement products, Farmscape is only produced to order by the manufacturer. It is not stocked by SLE Cladding Ltd or as far as we know by any other stockist. Production requires that products are taken directly off the production line (and not from outside stock) and held undercover for a period  to cure. Depending on how busy the manufacturers are, the standard delivery period can sometime be extended. We strongly advise ordering in good time if planning to use Farmscape or any other coloured fibre-cement. 

 

Sheet Lengths = 1525mm, 2440mm, and 2900mm Only

 

The range of Sheets, Fittings & Accessories as per below.

 
The complete range of the manufacturers Farmscape drawings are reproduced below in the same order as in their catalogue (left to right)
PR6. Sheet. Overall width 1086mm. Cover width. 1016mm. Nominal pitch of corrugation 146mm. Overall depth profile 54mm. Nominal thickness 6mm. Cranked Crown Ridge Sheet. Girth  750mm. Roof Pitches 10,12.5, 15,17.5,  deg.
NOTE.750mm girth only.
Cranked Crown Ridge Vent Sheet. 750mm girth. Pitches 10, 12.5, 15, 17.5  deg.
NOTE. 750mm girth only.
Two Piece Close Fitting Ridge. Coverwidth 1016mm. Overall Width 1124mm
Two Piece Ventilating Ridge. Coverwidth 1016mm. Overall Width 1124mm

Hooded Two Piece Ridge Finial

Open Protected Ridge Flashing. Used in Pairs. Cover length 2200mm. Soffit for open protected ridge, cover length 2400mm. Coverwidth 300mm Roll Top Barge Board. Overall Lengths. 1800, 2400 & 3000mm Cover Lengths 1650, 2290 & 2850mm. Wing Dimensions 200 x 200mm & 300 x 300mm 

 

Cranked Crown Roll Top Barge Board. Girths 1300 & 2200mm Wing Dimensions 200 x 200mm & 300 x 300mm. Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments. Vergeline Barge Board. Handed. Cover Lengths 1800, 2400, & 3000mm. Wing Dimensions 310 & 300.  Cranked Crown Vergeline Barge Board . Girth 1300mm. Wing Dimensions 310 x 300mm.  Roof Pitches 5 - 22.5 deg. in 2.5 deg. increments. External Corner Piece. Wings 200 x 200mm. Lengths 1800, 2400 & 3000mm.
Movement Joint  Movement Joint Crown Cap Movement Joint Two Piece Ridge Cap  Movement Joint Stop End
 

Current Colours

Note. Sherwood photos not yet available. See Serpentine notes below

   

Anthracite Sherwood Bracken

Note. Sherwood flat photo not yet available. See Serpentine notes below

Note. Jasper has been replaced by Bracken
No flat photo yet available.

Anthracite

            Sherwood

Bracken

 

 

Discontinued Colours

Jasper profiled photo not available

 
 

Jasper

Serpentine

 

Jasper. No longer available

Note. Serpentine finish has been discontinued and replaced with Sherwood
Please note that although these colours are very similar, they should not be mixed on the same building as the weathering characteristics are very different. Photos not yet available.

 
     

For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

Copyright (c)1999 SLE Cladding Limited.