SLE Cladding Limited

The term flashing covers any folded flat sheet and includes the folded ridge sheet and the barge board which is used to cover the joint between the wall and the roof at the gable ends of buildings.

Flashings are made in 3 metre lengths only and can be made to suit most shapes and angles. Problems can arise when angles are required close to one another, say 25mm (1inch) apart.

The edge of the flashing can either have straight cut edges or to stiffen the flashing a 10mm welt (fold) can be added to the edges. See ordering instructions below.

SLE Cladding Ltd carries stocks of flat sheets size 3 metres x 1.230 metres in 0.7mm thick steel only, The range includes the 12 most popular Plastisol colours plus some of the brighter Accent range of colours as well as Galvanised Steel and some Polyester Coated Steel.

Below is illustrated the 12 most popular Plastisol colours. For more and better charts and information on the problems of colour matching CLICK HERE to visit the main colour charts pages.

Bamboo	08 C 35	White	00 E 55
Black	00 E 53	Olive Green	12 B 27
Goosewing Grey	10 A 05	Wedgwood Blue	18 C 37
Merlin Grey	18 B 25	Ocean Blue	18 C 39
Moorland Green	12 B 21	Terracotta	04 C 39
Mushroom	10 B 19	Vandyke Brown	08 B 29


A standard ridge sheet. 3 metres long with 400mm Girth (16") 200mm Wing (8") at 130 deg. angle. Sheet will flex to meet most angles	A standard Barge Flashing. 3 metres long with 400mm Girth (16") 200mm Wing (8") at a 90 deg. angle

A shadowline barge can make a feature of an otherwise plain end to a building	Parapet Flashing

CUSTOM FLASHING SERVICE Flashings can be custom made to your own specification. Please fax or post a drawing of your requirements as per the illustration shown above. Use an asterisk (*) to denote the coloured side. Please note that flashings are produced in 3m lengths only. Our technical staff are available throughout the day if you wish to discuss your requirements/specifications with them.