For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

COMPOSITE PANELS

 

The new LPCB  Trisomet Panel. Approved for Roof & Wall Applications

 
 

 
CLICK HERE To see fixing Diagrams
CLICK HERE for TRISOMET Load Span Tables for 40 & 50mm
CLICK HERE for TRISOMET Load Span Tables for 60 & 80mm

 

Trisomet composite panels have been improved to give your building design the edge. Its new robust interlocking joint delivers LPC and FM approved solutions for both roof and wall.
   Fire Resistance    Thermal Efficiency
  • LPC EXT - A Approval
  • 1 Hour Fire Resistance (BS 476 P22
  • FM Approval

  • Compression moulded lap joint

  • No additional side lap sealant needed

  • Improved Lambda value

  • Reduced propensity to air leakage
   Environmentally Harmonious
  • CFC/HCFC Free
  • Zero Ozone Depletion
Trisomet is a profiled polyisocyanurate composite panel with a cover width of 1000mm and a profile depth of 32mm. It is equally suited for wall or roof assembly. When used in roof applications, construction can be safely undertaken down to a 4 degree pitch using conventional through fasteners.

Factory assembled windows, rooflights and flashing accessories complete the system, offering cost-effective, fully insulated "warm construction" for industrial and commercial buildings. Curved outer profiles are also available to complement the Trisomet system. The panel specification can be matched with a range of fasteners, sealants and flute fillers.

Trisomet is available in a wide range of finishes including Colorcoat Armacor, Colorcoat HPS200, Colorcoat Celestia and Colorcoat Prisma colours. The inner face is a bright white polyester. The outer skin has a thickness of 0.5mm or 0.7mm. The inner skin has a thickness of 0.4mm. Trisomet panels are available in core thicknesses of 40mm, 60mm and 80mm. The panel is available in lengths up to 14,000mm
Fixing Specification
Application Roof & Wall Roof - down to 4 degrees pitch
Wall - vertical or horizontal
External Finish Colorcoat Armacor
Colorcoat HPS200
Colorcoat Celestia
Colorcoat Prisma
Internal Finish Smooth Bright White Polyester
External Face Profiled (1000/32)
Internal Face Planked
Standard Width 1000mm
Non Standard Width N/A
Maximum Length 14,000mm
External Gauge 0.5mm Steel, 0.7mm Steel
Internal Gauge 0.4mm Steel
Thickness "U" value. (Assuming 1000mm module) 40mm - 0.45W/m2K
60mm - 0.32W/m2K
80mm - 0.25W/m2K
100mm - 0.20W/m2K
Weight 40mm - 10.53kg/m2
60mm - 11.29kg/m2
80mm - 12.05kg/m2
Insulant PIR (HCFC & CFC free) LPCB approved
Acoustic Properties Sound transmission class rating - 28db (for sound transmission loss tabulated from frequency range 100-5000 Hz)
 
Features & Benefits of the New Trisomet panel
  • The panel's steel interlocking robust joint gives 1 hour minimum fire resistance.
  • The panel carries approval by the Loss Prevention Certification Board (LPCB) and also Factory Mutual (FM) for both roof and wall applications.
  • The interlocking and angled joint design allows the panel to be compressed tightly at its side lap giving reduced air permeability
  • Greater panel strength is achieved by the interlocking liner providing greater resistance to loading the scope to span larger distances
  • The increased thermal efficiency makes it ideally suited to high humidity conditions.
  • The panel is HCFC and CFC free.
  • The panels are available in a wide range of pre-finished steel products including Colorcoat Armacor and Colorcoat HPS200, the most specified pre-finished steel in Europe which is now maintenance free and covered with the Confidex Guarantee for up to 30 years.
  • Platinum System Warranty available.
When used in roof applications, the construction can be safely undertaken down to a 4 degree pitch using conventional through fasteners.

Factory assembled windows, rooflights and flashing accessories complete the system, offering cost effective, fully insulated "warm construction" for industrial and commercial buildings.

Curved eaves and ridge details can also be accommodated to complement the Trisomet system. The panel specification can be matched with a range of fasteners, sealants and flute fillers.

Fixing Specification.

Primary - preferably positioned in the valley. High thread fasteners are recommended incorporating an EPDM sealing ring with a 19mm diameter load spreading washer, one fixing per trough at sheet ends and every other trough at intermediate supports.

Secondary - high torque seam stitching screws are recommended which have an EPDM sealing ring with a 14mm diameter washer to be secured at 450mm centres down the lapping profile.

Trisomet panels are available in core thicknesses of 40mm, 60mm and 80mm. The panel is available in lengths of up to 14,000mm. The panel has a cover width of 1000mm and a profile depth of 32mm.
 

Another use for Trisomet

TRISOMET RTS

   Trisomet RTS, roof tile support system offers an alternative to traditional timber truss and structural metal tray lining systems

CLICK HERE

to visit the TRISOMET RTS page

 

Note. SLE Cladding Ltd does not supply Slates or Tiles
 
     
 

For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32

Copyright (c)1999 SLE Cladding Limited.