SOLAR PROTECT

Direct sunlight can have a significant effect on roofing materials. The heat of the day can cause them to expand until evening when, as the roof cools, the coating contracts again. Repeated on a daily basis, this can create areas of weakness and material breakdown in a roof coating. Because bitumen is black it absorbs heat rather than reflecting it, so it is prone to the effects outlined above and this drastically reduces the life expectancy of the roof coating.

With the application of a suitable solar protective layer the problems above can be dramatically reduced to enable the waterproofing layer to last a great deal longer. The main colour choices are basically silver or white (Reflect for pitched roofs and Supersol) Other colours such as those provided by the waterproofing compound Tection can only be considered as decorative materials although they should offer some improvements as black is the colour that will absorb the heat most.

A premium grade product Alubit is also available.

SUPERSOL

DESCRIPTION. A brilliant white alcohol based solar reflective coating for flat or pitched roofs.

USES. For use as a solar reflective coating that will provide long lasting protection against UV degradation and solar heat gain. Specifically formulated for use on mastic asphalt, Supersol is also suitable for use over all types of roofing felt and fully cured bituminous coatings.

APPLICATION. Stir thoroughly before application to obtain a uniform colour. Following recommended preparation. Apply two coats using a soft bristle broom. Apply the second coating at right angles to the first.

DRYING TIME. 6 hours under average conditions, allow 24 hours between coats.

COVERAGE.  1.6 square metres per litre per coat.

SIZES 20 Litre Containers.

Picture on container