For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32.
 
FLAT CLEAR SHEETS
 
STYRENE, ACRYLIC PVC &  POLYCARBONATE SHEETS

We offer a wide range of flat, clear plastic sheets which are all stronger and more difficult to break than glass and will not shatter with dangerous sharp sections. All are stock items. Please page down.

CLEAR STYRENE

FOR INTERIOR USE ONLY. (Not UV Protected) A rigid and completely clear material. Suitable for internal glazing, picture framing, door panels, displays and models. Approximately 3 times the impact strength of glass. Available in 2 and 4mm thicknesses in sizes as per below.

. The protective film should be left in place, peeling back at the edges to fit and only removed from both sides when the of assembly has been completed.

Millimetres
Approx. Imperial Equivalent.
1220 x 610
4ft x 2ft
1830 x 610
6ft x 2ft
1220 x 900
4ft x 3ft
1220 x 1200
4ft x 4ft
1800 x 600
6ft x 2ft
1800 x 1200
6ft x 4ft
2400 x 1200
8ft x 4ft

Use millimetres for accuracy


IMPORTANT NOTE. All the the different types of sheets below are supplied with a clear protective pvc film attached to both sides. The side with the fixing instructions written on the protective film is the upper (exterior) side and UV protected. This film should be left in place, peeling back at the edges to fit and only removed from both sides when the of assembly has been completed.

 

 CLEAR ACRYLIC
 

FOR INTERIOR & EXTERIOR USE. A clear sheet with 10 times the impact strength of glass with a useful life expectancy of 15 - 20 years approx. Because of its superior strength you can use this material in thicknesses of 1mm less than its equivalent glass requirements. Easy to cut to size and drill with standard tools. Available in 2 and 4mm thicknesses in sizes as per below.

Millimetres
Approx. Imperial Equivalent.
1200 x 600
4ft x 2ft
1800 x 600
6ft x 2ft
1200 x 1200
4ft x 4ft
1800 x 1200
6ft x 4ft
2400 x 1200
4ft x 4ft

Use millimetres for accuracy


Clear Acrylic is ideal for garden greenhouses.

SHATTERPROOF POLYCARBONATE
A glazing material of outstanding impact resistance. Light in weight, rigid yet flexible, accommodates thermal and building movement without cracking. Its superior strength and thermal performance provides the ideal glazing where hazardous damage could occur - windows, doors, partitions, shower enclosures, roof lights, conservatories and greenhouses.
Helps combat vandals & burglars. Over 60% of break-ins are via glass windows and doors. Manufactured from polycarbonate resin it is 200 times tougher than glass. Will not crack, shatter or splinter. Properly fitted it will even withstand an attack with a sledgehammer.
Outstanding clarity and excellent light transmission. Easy to cut requiring no special tools. As secondary glazing can be used both internally and externally depending on installation requirements. Available in 4mm & 6mm thicknesses, sizes as per below.

Millimetres

Approx. Imperial Equivalent.

610 x 610
2ft x 2ft
1220 x 610
4ft x 2ft
1220 x 1220
4ft x 4ft
1830 x 610
6ft x 2ft
1830 x 1220
6ft x 4ft
2440 x 610
6ft x 2ft
2440 x 1220
8ft x 4ft

Use millimetres for accuracy

 

 
For further information please contact SLE Cladding Ltd. Tel. 01948 666 321. Fax.  01948 66 55 32.

Copyright (c)1999 SLE Cladding Limited.